Quick Reference Guide
|
Function |
Keys |
Indication |
|
|
|
Turning on the Orbit Writer |
Press and hold Up Arrow + Down Arrow keys together for 3 seconds to
turn on the unit |
Single Short Pulse |
|
|
|
Turning Off the Orbit Writer |
Press and hold Up Arrow +
Down Arrow keys together for 3 seconds to turn off the unit |
Single Long Pulse |
|
|
|
Entering Firmware Upgrade mode |
Press and hold down the
Up Arrow + Dot 5, then press Dot 8. Release Dot 8 first, then release the Up
Arrow + Dot 5 |
N/A |
|
|
|
System Reset |
Up Arrow + Dot 8 |
N/A |
|
|
|
Enter/Exit BIST (Built-in self-test) |
Press and hold Select +
Space keys together for 3 seconds |
Single long pulse |
|
|
|
Forget all devices from the Orbit Writer |
Press and hold Space +
Down Arrow together for 3 seconds |
Single Short Pulse |
|
|
|
Check Battery level |
Press and hold Space + Up
Arrow keys together for 3 seconds |
• Single short pulse: If
the battery capacity is at less than 20%. • Two short pulses: if
the battery capacity is between 21% and 40%. • Three short pulses: If
the battery is between 41% and 60%. Four short pulses: If the
battery is between 61% and 80%. • One long pulse If the
battery is greater than 80%. |
|
|
|
Entering DFU/Boot mode |
Press and
hold down the Up Arrow + Dot 6, then press Dot 8. Release Dot 8 first, then
release the Up Arrow + Dot 6 |
N/A |
|
|
|
Check auto turn off timeout level |
Press and
release Space + Left Arrow |
L1 - 5
Minutes - Single Short Pulse |
||
|
Change auto turn off timeout level |
Press and
hold Space + Left Arrow together for 3 seconds |
L1 - 5
Minutes - Single Short Pulse |
||
|
Check vibration intensity level |
Press and
release Space + Right Arrow |
L1 - LEVEL 1 - Single Short Pulse L2 - LEVEL 2 - Two Short Pulses (Default) L3 - LEVEL 3 - Three Short Pulses L4 - LEVEL 4 – Four Short Pulses L5 – LEVEL 5 – Five Short Pulses L6 – LEVEL 6 – Six Short Pulses |
||
|
Change vibration intensity level |
Press and
hold Space + Right Arrow together for 3 seconds |
L1 - LEVEL 1 – Single Short Pulse L2 - LEVEL 2 - Two Short Pulses (Default) L3 - LEVEL 3 - Three Short Pulses L4 – LEVEL 4 – Four Short Pulses |
||
|
Activate the voice
record icon when the focus is on the Voice record icon of WhatsApp or
iMessage while using the keyboard-HID protocol |
Long press
the Select key to enable. |
NA |
|
|
|
Stop the voice record icon When the focus is on the Voice
record icon of WhatsApp or iMessage while using the keyboard-HID protocol |
Press the
space key to stop the recording |
NA |
|
|
|
||||
|
||||
|
Function |
Keys |
Indication |
||
|
Forget device
on channel 1 and enable pairing |
Press and
hold Space + Left Arrow + Dot 1 together for 3 seconds |
Single Short Pulse |
||
|
Forget device
on channel 2 and enable pairing |
Press and
hold Space + Left Arrow + Dot 2 together for 3 seconds |
Single Short Pulse |
||
|
Forget device
on channel 3 and enable pairing |
Press and
hold Space + Left Arrow + Dot 3 together for 3 seconds |
Single Short Pulse |
||
|
Forget device
on channel 4 and enable pairing |
Press and
hold Space + Right Arrow + Dot 4 together for 3 seconds |
Single Short Pulse |
||
|
Forget device
on channel 5 and enable pairing |
Press and
hold Space + Right Arrow + Dot 5 together for 3 seconds |
Single Short Pulse |
||
|
Active Channel |
|
|||
|
||||
|
Function |
Keys |
Indication |
||
|
Activate channel 1 |
Press and
release Space + Left Arrow + Dot 1 |
• No
Bluetooth device is paired with the channel – Three short vibration pulses |
||
|
Activate channel 2 |
Press and
release Space + Left Arrow + Dot 2 |
|
||
|
Activate channel 3 |
Press and
release Space + Left Arrow + Dot 3 |
• A Bluetooth
device is paired but not actively connected – Two short vibration pulses |
||
|
Activate channel 4 |
Press and
release Space + Right Arrow + Dot 4 |
|
||
|
Activate channel 5 |
Press and
release Space + Right Arrow + Dot 5 |
• A Bluetooth
device is paired and connected – A single short vibration Pulse |
||
|
Activate channel 6 |
Press and
release Space + Right Arrow + Dot 6 |
|
||